The Simpson Strong-Tie SPR range is an innovative, high-capacity selection of structural timber connectors specifically developed for fast-track roof framing and sloped framing applications. Accommodating varied timber heights from 145mm up to 250mm, it features a unique site-adjustable design that allows the installation slope angle to be bent manually from 0° to 45° both upwards and downwards. This configuration ensures complete compatibility with pitched roofs, rafters, purlins, and vaulted smooth beams on-site, eliminating layout delays and the high cost of custom, factory-preset skewed ironwork while maintaining elite engineering performance.
|
Dynamic Site Pitch Adjustment Enables precise manual adjustments between 0° and 45° up or down directly on-site, perfectly matching custom valley sets, rafter runs, and complex roof pitch geometry lines. |
Critical Single Bend Profile High-yield galvanised structural steel plate geometry must only be bent a single time along the desired angle line to maintain code compliance and safe vertical load verification capacity. |
Simpson Strong-Tie SPR47/140 45-47mm Slope
Adjustable Hanger 1.5mm Thickness Pre-Galv
Product Code: 78SPR47140
|
|
Simpson Strong-Tie SPR47/200 45-47mm Slope
Adjustable Hanger 1.5mm Thickness Pre-Galv
Product Code: 78SPR47200
|
|
Simpson Strong-Tie SPR91/140 89-91mm Slope
Adjustable Hanger 1.5mm Thickness Pre-Galv
Product Code: 78SPR91140
|
|
Simpson Strong-Tie SPR91/200 89-91mm Slope
Adjustable Hanger 1.5mm Thickness Pre-Galv
Product Code: 78SPR91200
|
|
